To mount a meeting room screen to a glass wall we recommend using the 3M foam pad provided with the device and the additional vinyl double-sided sticker provided separately. As well as improving the appearance of the device from the reverse of the glass, the vinyl is easier to remove if needed.
How to mount the screen to a glass wall
Review the Installation Overview for information about the mounting plate, cable routing, and recommended screen height.
- Refer to the 3M Vinyl Application instructions to secure the vinyl to the glass and wait 24-hours before continuing.
- After 24 hours, remove the protective backing from one side of the 3M foam pad and stick the pad onto the mounting plate.
- Remove the remaining protective backings from the 3M foam pad and the vinyl sticker, then firmly secure the mounting plate and foam pad to the vinyl.
- Secure the meeting room screen to the mounting plate using the screws provided with the device.
Part numbers
ACCE01 Vinyl double-sided sticker
ACCE01FOAM 3M double-sided foam pad
Post your comment on this topic.