Condeco touch screens: Digital display allowing users to make instant bookings
For further information on any of our products please
Contact Us
Technical Screen Data
Please see below for technical specifications on all our digital signage screens.
10.4 inch Condeco Room Screen
|
Screen:
10.4” VGA colour LCD display
640 x 480 screen resolution
Built-in touch-screen
Processor:
520MHz PXA270 processor
128MB low-power SDRAM
32MB Flash memory
Additional features:
Two tri-colour LED room status
indicators
Ambient light sensor (option)
Software shutdown with low power
LED beacon when not in use
Microphone/speaker for VoIP
application (option) - software
license for VoIP required
RFID reader, supported cards (other
formats available on request):
- HID 1386 ISOProx II Card
- HID 1326 ProxCard II Clamshell
- Mifare Ultralight
- Mifare Classic 1K,4K,8K
- HID iCLASS
- ISO 14443 Proximity-coupled
|
Power:
PoE (Power over Ethernet)
Power adaptor (to be supplied separately) for non PoE installations
Operating system:
Windows CE
Embedded application in Microsoft C# (where applicable)
IE 6 browser to run embedded web application software (where applicable)
Dimensions:
Height 198.76mm (7.8”)
Width 216.17mm (8.5“)
Depth recessed 39.45mm (1.5“)
Depth surface 27.7mm (1.1“)
Mounting:
Wall mount option – in wall
Surface mount option – glass/wall
Bezel:
Available in a matt silver finish |
Network:
Ethernet 10/100 interface
SB interface |
|
Server connectivity:
Communicates with server using web technology on port 80 (HTTP) or 443 (HTTPS)
Requires either static IP address or uses DHCP
Automated firmware updates from server (or internet if applicable)
Security:
Embedded CE cut down to remove unwanted services and applications
No hard disk; if the device is suspended, all changes will be saved to the Flash memory only
If the unit is rebooted without being suspended, no changes will be saved
X86 processor not used so that standard software and most viruses will not operate
No access to the operating system via the touch screen |
8 inch Condeco Room Screen
|
Screen:
8” SVGA colour LCD display
800 x 600 screen resolution
Built-in touch screen
Processor:
520MHz PXA270 processor
128MB low-power SDRAM
32MB Flash memory
Additional features:
Two tri-colour LED room status
indicators
Ambient light sensor (option)
Software shutdown with low power
LED beacon when not in use
Microphone/speaker for VoIP
application (option) - software
license for VoIP required
RFID reader, supported cards (other
formats available on request):
- HID 1386 ISOProx II Card
- HID 1326 ProxCard II Clamshell
- Mifare Ultralight
- Mifare Classic 1K,4K,8K
- HID iCLASS
- ISO 14443 Proximity-coupled
|
Power:
PoE (Power over Ethernet)
Power adaptor (to be supplied separately) for non PoE installations
Operating system:
Windows CE
Embedded application in Microsoft C# (where applicable)
IE 6 browser to run embedded web application software (where applicable)
Dimensions:
Height 245mm (9.6”)
Width 275mm (10.8”)
Depth recessed 24mm (1.0”)
Depth surface 36mm (1.4”)
Mounting:
Wall mount option – in wall
Surface mount option – glass/wall
Bezel:
Available in either high gloss black or white |
Network:
Ethernet 10/100 interface
USB interface
|
|
Server connectivity:
Communicates with server using web technology on port 80 (HTTP) or 443 (HTTPS)
Requires either static IP address or uses DHCP
Automated firmware updates from server (or internet if applicable)
Security:
Embedded CE cut down to remove unwanted services and applications
No hard disk; if the device is suspended, all changes will be saved to the Flash memory only
If the unit is rebooted without being suspended, no changes will be saved
X86 processor not used so that standard software and most viruses will not operate
No access to the operating system via the touch screen |
4.3 inch Condeco Desk Screen
|
Screen:
4.3” VGA colour LCD display
600 x 480 screen resolution
Built-in touch-screen
Processor/
Operating system:
520MHz PXA270 processor
128MB low-power SDRAM
32MB Flash memory
Embedded program in Microsoft C#
Additional features:
Two tri-colour LED room status indicators
Ambient light sensor to auto-dim display and indicator LED
Software shutdown with very low power LED beacon
when not in use
Mifare RFID reader |
N
etwork:
Ethernet 10/100 interface
Power:
PoE (Power over Ethernet)
Power adaptor (to be supplied separately) for non PoE installations
Mounting:
Desk mount option – in-desk or on-desk
Surface mount option – wall or baffle-board
Bezel:
Available in a matt silver finish |
10 inch Condeco iSign
|
Screen:
10.4” TFT colour LCD display
480 x 640 screen resolution
Built-in interactive menu
Processor/
Operating system:
520MHz PXA270 processor
128MB low-power SDRAM
32MB Flash memory
Embedded program in Microsoft C#
Additional features:
Integrated header & footer panels available
Full range of matching static identification & way-finding signs available
Mounting:
Wall mount – surface or recessed
Glass mount – surface only |
Network:
Ethernet 10/100 interface
USB interface
Operation system:
Windows CE Embedded application in Microsoft C# (where applicable)
IE 6 browser to run embedded web application software (where applicable)
Power:
12W
Power adaptor and smart box supplied separately for combined power and data connection via single CAT 5
Dimensions:
Height 332mm (13.1”)
Width 252mm (9.9”)
Depth recessed 16mm (0.6”)
Depth surface 30mm (1.2”)
Glass panel:
Available with a black border
|
Server Connectivity:
Communicates with server using web technology on port 80 (HTTP) or 443 (HTTPS)
Requires either static IP address or uses DHCP
Automated firmware updates from server (or Internet if applicable)
Security:
Embedded CE cut down to remove unwanted services and applications
No hard disk with all changes saved to the flash memory only if the device is suspended
If the unit is rebooted without being suspended, no changes will be saved
X86 processor not used so that standard software and most viruses will not operate
No access to the operating system via the interactive menu |
10 inch Condeco iSign
Screen:
10.4” TFT colour LCD display
480 x 640 screen resolution
Built-in interactive menu
Processor/ Operating system:
520MHz PXA270 processor
128MB low-power SDRAM
32MB Flash memory
Embedded program in Microsoft C#
Additional features:
Integrated header & footer panels available
Full range of matching static identification & way-finding signs available
Mounting:
Wall mount – surface or recessed
Glass mount – surface only |
Network:
Ethernet 10/100 interface
USB interface
Operation system:
Windows CE Embedded application in Microsoft C# (where applicable)
IE 6 browser to run embedded web application software (where applicable)
Power:
12W
Power adaptor and smart box supplied separately for combined power and data connection via single CAT 5
Dimensions:
Height 332mm (13.1”)
Width 252mm (9.9”)
Depth recessed 16mm (0.6”)
Depth surface 30mm (1.2”)
Glass panel:
Available with a black border
|
Server Connectivity:
Communicates with server using web technology on port 80 (HTTP) or 443 (HTTPS)
Requires either static IP address or uses DHCP
Automated firmware updates from server (or Internet if applicable)
Security:
Embedded CE cut down to remove unwanted services and applications
No hard disk with all changes saved to the flash memory only if the device is suspended
If the unit is rebooted without being suspended, no changes will be saved
X86 processor not used so that standard software and most viruses will not operate
No access to the operating system via the interactive menu |